Door Hardware Repair & Service in Reno & Sparks
When a door sticks, drags, slams, will not latch, or no longer secures properly, the problem may involve more than the lock. Comstock Lock services the hardware that helps doors close, latch, and operate correctly.
More Than Just the Lock
Fix the Parts That Help the Door Work Properly
A door that does not close or latch correctly can create both security and everyday-use problems. Comstock Lock can inspect the lock, hardware, and door movement together to identify the cause.
Door Closers
Adjust, repair, or replace closers when a door slams, closes too slowly, will not close completely, or no longer controls the door properly.
Panic Bars & Exit Devices
Service commercial panic hardware, exit devices, latching components, and related parts when doors become difficult to open, close, or secure.
Hinges & Alignment
Address loose or worn hinges and alignment problems that cause doors to sag, drag, rub, or shift away from the strike.
Strikes & Latching
Correct strike, latch, and alignment issues when a door must be pushed, pulled, lifted, or slammed before it will secure.
Lock & Lever Hardware
Repair or replace worn locks, levers, knobs, deadbolts, cylinders, and related hardware when components no longer operate reliably.
Door Problem Diagnosis
Inspect the door as a complete system when the exact cause is unclear, including the lock, latch, strike, hinges, closer, frame, and door movement.
Signs Your Door Hardware Needs Attention
Look at the Whole Door, Not Just the Lock
A lock may appear to be the problem when the real issue is alignment, hinges, the strike, a closer, or another piece of hardware. Comstock Lock evaluates how the complete door operates before recommending the repair.
Questions About Door Closers, Latches & Hardware
Door problems are often caused by several components working together. These are some of the questions customers commonly ask.
-
Why does my door only latch when I push or pull it?
This often indicates an alignment problem between the latch or deadbolt and the strike. Hinges, door movement, the frame, and other hardware may also contribute to the problem.
-
Can a door closer be repaired or adjusted?
Some closer problems can be corrected through adjustment or repair, while worn or failed units may need replacement. The condition of the closer and door should be inspected first.
-
Do you repair panic bars and exit devices?
Yes. Comstock Lock services panic bars, exit devices, latching components, strikes, and related commercial door hardware when they are not operating properly.
-
Why does my door drag or rub the frame?
Loose or worn hinges, movement in the door or frame, alignment problems, and other hardware issues can cause a door to sag, drag, or rub.
-
Do you work on residential door hardware too?
Yes. While many door hardware problems involve commercial properties, Comstock Lock can also help with residential entry door locks, deadbolts, latching, alignment, and related hardware.
-
Does a bad lock always mean the lock needs replacement?
No. A problem that appears to be caused by the lock may actually involve the strike, latch, hinges, alignment, closer, or other components. Inspecting the complete door helps determine the appropriate repair.
Schedule Door Hardware Service
Call Comstock Lock to discuss the door problem and schedule an inspection of the lock, hardware, and door operation.
Call 775-851-7233